UHU Glue All Plast
- DESCRIPTION
Size: 33ml
Forms a hard but flexible adhesive bond with a thermoplastic character
Resistant from -30°C to approx. +90°C
Resistant against water, oil and alcohol
Store in tightly closed packaging in a dry, cool and frost-free place.
NOT FOR CHILDREN
- APPLICATION
Also glues materials such as wood, paper, cardboard, leather, metals, glass, ceramics.
NOT SUITABLE FOR:
Not suitable for polyamide (PA), acetal resin (POM) polyethylene (PE), polypropylene (PP), polytetrafluoroethylene (PTFE), silicons (Si), Styropor®
Not suitable for leather used for clothing.
- HANDLING BEFORE USE:
Personal safety
It contains volatile, highly flammable solvents.
Therefore, corresponding safety measures should be taken regarding processing and storage.
Surface requirements
The surface must be dry, clean and free of dust and grease.
- DURING USE:
Directions for use
Depending on the specific requirement, one or both of the parts to be connected are spread with adhesive and joined together immediately.
An initial bond strength is attained after 5 – 10 minutes.
The high bond strength of UHU allplast on plastics is attained by slightly dissolving the surface of the plastic material.
For this reason, the adhesive should only be applied in small quantities on low caliper plastics.
- AFTER USE:
Stains/residue
Adhesive residues and stains can be removed with acetone or thinner for nitrocellulose lacquer.
